Cheap Simple EPS Continuous Pre Expander machine
Main features :
1. The material dispatching cylinder is made from stainless steel
and has insulation cotton in the inter layer with reliable property
,stable weight ,high production efficiency and low energy
consumption.
2. The feeding system of the machine has primary and secondary
feeding devices with the foaming density of 7-40g/L.
3. All the feeding ,foaming,screening,crushing,conveying to
ripening hopper are all completed automatically.
Main features:
The machine adopts MitsubishiPLC and Taiwan HMI with atuo to
filling material,auto electronic weighint,auto controlling chamber
temperature , pressure and level testing to
Steam system:Steam pressure reducer and angle valve to contorl steam.
Fillng system:Adopts electronic weighing system ,setting filling weight to HMI
for material filling automatically
Material level control:Adopts laser sensor to control the expansion level.
Electronic control: Mitsubishi PLC and TaiwanHMI,chneider components
| Item | Unit | PSPEB-N70 |
| Expansion Chamber | Diameter | mm | ∅500 |
| Volume | m³ | 0.2 |
| Height | mm | 1000 |
| Steam | Inlet | mm | ∅25 |
| Consumption | kg/cycle | 3-5 |
| Pressure | Mpa | 0.6-0.8 |
| Compressed air | Inlet | mm | ∅20 |
| Pressure | Mpa | 0.6-0.8 |
| Drainage | Blower outlet | g/L | ∅65 |
| Connected load | Installing power | Kw | 9.5 |
| Density | g/L | 12-30 |
| Overall size (LXWXH) | mm | 3100X1500X3500 |
| Weight | kg | 1500 |
| Room height required | mm | 5000 |
| Productivity | 12g/L | kg/h | 70-90 |
| 18g/L | kg/h | 110-120 |
| 20g/L | kg/h | 160-180 |
| 30g/L | kg/h | 200-220 |
FAQ
1. Where is your factory located?
We have 2 production plant, one plant locates in Hangzhou which
professionally producing EPS/EPP/ETPU machine. Another factory
locates in Jiangsu Provide which producing EPS/EPP/ETPU mould. Both
two factories are pretty close to the Shanghai port for easiest
transportation.
2. Do you have detailed and professional installation manual?
We will provide very detailed installation manuals and videos, and
the service until you are satisfied
3. Are you a trading company or a manufacturer?
We are manufacturer.
4. How long is your delivery time?
Normally delivery time is 30~45 days.
5. How many years have your company made this kind of equipment?
More than 10 years.
6. Can I only buy some spare parts from you?
Yes, we also provide all kinds of spare parts that relatives to our
machine.
7. How do you pack the equipment?
We will strengthen and protect the equipment to ensure that they
will not be damaged during transportation
8. Can you send your staff to install the equipment for us?
Under normal conditions, it is possible. Now it is an epidemic
situation.
We will try our best to assist in case wecannot send technician in
time. We will also conduct video connections with guests to teach
them to install them in place.
9. Can you can design the equipment according to our size?
Yes, it is acceptable
10. How many production lines in your factory?
We have total 10 production line.
