EPS Basic Automatic Foam Molding Machine Making Eps Box
Type equipment can produce vegetable transport box, seafood
transport box, fruit transport box and so on
1. High-strength square tube welded by tempering prevent form
deformation .
2. After sand-blasting,greatly improve corrosion performance and
service life of equipment .
3. Adopt PLC(Mitsubishi) and HMI(WEINVIEW) ,for close-mold ,filling
,heating, cooling,de-mold,the whole proess is automatic.
Main features :
1.The rack configuration with high strength improves the useful life
of equip- ment by high annealing aging heat treatment,derusting by
sandblast,galvani- zed surface and spraying heavy-duty paint on the
surface.
2.Adopted with two-part light replaceable guide bushing and wearable
self- lubricating copper bushing to resolve the problem of
difficulty to replace guide bushing of the equipment and improve
the lubricating effect atthe same time .
3.The hydraulic pressure System of the equipment is adopted with the
design scheme of high speed and high pressure.The
opening&clamping mold speed of conventional pumping unit is
150mm/s and the maximum opening&clamping mold speed of
energy-saving machine can reach at 250mm/s.The automatic machine is
adopted with clamping mode with two points each in both sides,
which can clamp mold preferably to reduce leakage.
4.Technique application of pilot-operated steam valve:the valve is
adopted with cylineder actuator of DN 80 to control large-diameter
valve with accurate sensi- tive control.The input steam pressure
stabilizes in 0.1-0.15Mpa with the error of±0.01Mpa.The heating
time of the same type of equipment shortens by 30% and the energy
consumption decreases by 25-30% on year -on year basis.
| Item | Unit | PSSM120E | PSSM140E | PSSM160E |
| Mould Dimension | mm | 1200X1000 | 1400X1200 | 1600X1400 |
| Max Product Dimension | mm | 1050X850X350 | 1250X1050X350 | 1450X1350X350 |
| Stroke | mm | 150-1500 | 150-1500 | 150-1500 |
| Steam Inlet | mm | DN80 | DN100 | DN100 |
| Steam Consumption | t/t | (7-11t)Steam of 1t Material |
| Cooling Water inlet | mm | DN80 | DN80 | DN80 |
Cooling Water
Consumption | kg/cycle | 45-130 | 55-150 | 60-180 |
| Compressed Air Inlet | mm | DN40 | DN40 | DN40 |
Compressed Air
Consumption | m³/cycle | 1.5 | 1.8 | 2 |
Vacuum Pump
Capacity | m³/h | 165 | 230 | 230 |
| Drainage Port | mm | DN125 | DN150 | DN150 |
| Connected Load | kw | 11 | 13 | 17 |
| Outside Dimension | mm | 4600X2100X3600 | 4600X2300X3800 | 4600X2500X4000 |
| Weight | kg | 4500 | 5000 | 6000 |
| Cycle Time | s | 50-90 | 60-100 | 70-140 |
FAQ
1. Where is your factory located?
We have 2 production plant, one plant locates in Hangzhou which
professionally producing EPS/EPP/ETPU machine. Another factory
locates in Jiangsu Provide which producing EPS/EPP/ETPU mould. Both
two factories are pretty close to the Shanghai port for easiest
transportation.
2. Do you have detailed and professional installation manual?
We will provide very detailed installation manuals and videos, and
the service until you are satisfied
3. Are you a trading company or a manufacturer?
We are manufacturer.
4. How long is your delivery time?
Normally delivery time is 30~45 days.
5. How many years have your company made this kind of equipment?
More than 10 years.
6. Can I only buy some spare parts from you?
Yes, we also provide all kinds of spare parts that relatives to our
machine.
7. How do you pack the equipment?
We will strengthen and protect the equipment to ensure that they
will not be damaged during transportation
8. Can you send your staff to install the equipment for us?
Under normal conditions, it is possible. Now it is an epidemic
situation.
We will try our best to assist in case wecannot send technician in
time. We will also conduct video connections with guests to teach
them to install them in place.
9. Can you can design the equipment according to our size?
Yes, it is acceptable
10. How many production lines in your factory?
We have total 10 production line.
